Harbor Freight Tools 96618 - Manual (Page 4)

Page 4 96618 / 96619 For technical questions, please call 1-800-444-3353.
PlEASE rEAD THE FOllOWING CArEFully
THe MANUFACTUrer AND/Or DISTrIBUTOr HAS PrOVIDeD THe PArTS lIST AND ASSeMBly DIAgrAM IN THIS MANUAl
AS A reFereNCe TOOl ONly. NeITHer THe MANUFACTUrer Or DISTrIBUTOr MAKeS ANy rePreSeNTATION Or
WArrANTy OF ANy KIND TO THe BUyer THAT He Or SHe IS qUAlIFIeD TO MAKe ANy rePAIrS TO THe PrODUCT,
Or THAT He Or SHe IS qUAlIFIeD TO rePlACe ANy PArTS OF THe PrODUCT. IN FACT, THe MANUFACTUrer AND/
Or DISTrIBUTOr exPreSSly STATeS THAT All rePAIrS AND PArTS rePlACeMeNTS SHOUlD Be UNDerTAKeN By
CerTIFIeD AND lICeNSeD TeCHNICIANS, AND NOT By THe BUyer. THe BUyer ASSUMeS All rISK AND lIABIlITy
ArISINg OUT OF HIS Or Her rePAIrS TO THe OrIgINAl PrODUCT Or rePlACeMeNT PArTS THereTO, Or ArISINg
OUT OF HIS Or Her INSTAllATION OF rePlACeMeNT PArTS THereTO.
MAINTENANCE AND SErVICING
BEFOrE EACH uSE, inspect the general condition of the Foot Switch. Check
for loose parts, cracked and/or any other damage that may affect safe operation.
When finished using Foot Switch, unplug from grounded outlet and tool and
store in a safe location out of the reach of children.
1.
2.
Once the 2-Step Foot Switch is properly set-up, use your foot (or hand) to step
or press down on the pedal once. remove your foot or hand.
The tool will now activate, allowing you to work with both hands.
To turn off the tool, press down on the pedal again. This will turn off the tool.
Please note: Avoid accidental starting/stopping. Do not step on the Foot Switch
unless you intended to turn on/off the tool
To reactivate the tool, simply step or press down on the pedal again.
1.
2.
3.
4.
OPErATING INSTruCTIONS
Once the Foot Switch is properly set-up, use your foot (or hand) to step or press
down on the pedal. yOU SHOUlD KeeP yOUr FOOT Or HAND ON THe
PeDAl DUrINg USe. removal of foot or hand pressure will deactivate the
switch and stop the unit connected to the Foot Switch.
The tool will now activate, allowing you to work with both hands.
To turn off the tool, remove your foot or hand from the pedal. This will turn off
the tool.
Please note: Avoid accidental starting/stopping by maintaining the same
amount of pressure on the Foot Switch.
To reactivate the tool, simply step or press on the pedal again. Do not remove
your foot or hand from the Foot Switch.
1.
2.
3.
4.
The following operating instructions are for the 96619 Foot Switch ONly:
The following operating instructions are for the 96618 Foot Switch ONly: