Husqvarna K960 - Manual (Page 5)

English – 5
GENERAL SAFETY PRECA UTIONS
Steps bef ore using a new power cutter
• Please read the operator’s manual carefully.
• Check the assembly and adjustment of the cutting blade.
See the instructions under the heading Assembling the
cutting blade.
• Start the engine and check the idling setting, see
instructions under the heading Maintenance. When the
carburettor is set correctly the cutting blade should be still
while idling. Setting of the idle speed is described under
the heading Fine adjustment of the idle speed T. Set the
correct speed according to these instructions. Do not use
the power cutter if the idle speed is not adjusted correctly!
• Let your Husqvarna dealer regularly check the power
cutter and make essential adjustments and repairs.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
All information and all data in the Operator’s Manual were
applicable at the time the Operator’s Manual was sent to print.
You will find the following labels on your power cutter:
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
emissions requirements. Category C = 50 hours, B = 125
hours, and A = 300 hours.
P ersonal protective equipment
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
!
W ARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
W ARNING! Use of products which cut, grind,
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.
!
W ARNING! A power cutter is a dangerous
tool if used carelessly or incorrectly and can
cause serious, even fatal injuries. It is
extremely important that you read and
understand the contents of this Operator’s
Manual.
!
W ARNING! The ignition system of this
machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with pacemakers. To
reduce the risk of serious or fatal injury, we
recommend persons with pacemakers to
consult their physician and the pacemaker
manufacturer before operating this machine.
!
W ARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
K6 5 0 ( 6 H V X S . 0 7 1 5 RF) 7 1 cc EM
K9 6 0 ( 6 H V X S . 0 9 4 5 RD ) 9 4 cc EM
K1 2 5 0 ( 6 H V X S . 1 1 9 5 RB) 1 1 9 cc EM