Hunter 28688 44 Stratford Five Minute Fan User Manual
Page 14
14
42443-01 • 09/20/10 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-6 . First install included 14W CFL bulbs into the sockets .
7-7 . Thread the light and fan pull chains through the hole in the center
of the glass bowl . Then, thread the light pull chain through the hole
in the center of the cover plate .
7-8 . Thread the fan pull chain through the grommet hole in the side of
the cover plate .
7-9 . Place the cover plate up against the glass bowl . Align the holes in
the cover plate and glass bowl .
7-10 . Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until
tight .
7-11 . Attach the extra pull chains
(included) to the light and fan
pull chains using the breakaway
connector . (You may find the
breakaway connector on the end
of the extra chain .)
For Light Bulbs
Metal Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
Breakaway
Connector