Husqvarna EA 850 - Manual (Page 2)

2 – English
CONTENTS
Contents Note the f ollowing before starting:
Please read the oper ator’s manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
The machine is only designed for edging lawns.
CONTENTS
Contents ...................................................................... 2
Note the following before starting: ................................ 2
WHA T IS WHAT?
What is what on the edger attachment? ...................... 3
SAFETY INSTR UCTIONS
Machine ′ s safety equipment ........................................ 4
General safety precautions .......................................... 4
General working instructions ....................................... 5
Basic working techniques ............................................ 6
ASSEMBL Y
Fitting the be vel gear ................................................... 7
Fitting the cutter ........................................................... 7
ST ARTING AND STOPPING
Star ting and stopping ................................................... 8
MAINTENANCE
Be vel gear .................................................................... 9
Lubricating the flexible drive shaft ................................ 9
Adjusting the edger’s cutting depth .............................. 9
Maintenance schedule ................................................. 9
TECHNICAL D ATA
T echnical data .............................................................. 9
!
W ARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
W ARNING! This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading ”Approved
accessories” in chapter Technical data in the
machine’s Operator’s Manual.