HP 9304M - Manual (Page 18)

HP ProCurve Routing Switch 9308M / 9304M Reviewer’s Guide
On-site upgrades to either business-day four hour support or 24X7 four hour support can be purchased
through HP.
Other fee-based services available that are highly recommended are hardware support contracts to
cover the routing switches when they are no longer in warranty, and extensions to the basic phone
support to cover network troubleshooting either during regular business hours or 24X7.
Hewlett-Packard can also provide site surveys, installation services, and actual management of the
network, depending on customer needs.
More information can be found at http://www.hp.com/rnd/support/support.htm or by contacting the
local HP sales office.
2.9.5 Year 2000 Compliance
The HP ProCurve Routing Switch 9304M and HP ProCurve Routing Switch 9308M are both Year 2000
compliant
3 . Refer to http://www.hp.com/year2000/compliance.html for HP’s Year 2000 compliance
definitions.
2.10 Network Management
Network management is an important part of a network solution. There are three levels of net
management available for the HP ProCurve Routing Switch 9304M and HP ProCurve Routing
Switch 9308M:
•
Web-based management - Configuration of individual routing switches can be done anytime,
anywhere through the web server available in each routing switch, accessible via a standard
web browser.
•
HP TopTools for Hubs & Switches - Management of a network of HP hubs, switches and routing
switches can be done through the included HP TopTools for Hubs & Switches application, part
of the HP TopTools suite of management products. HP TopTools for Hubs & Switches provides
a network map and device configuration in an web-based format for the routing switches.
HP TopTools for Hubs & Switches can manage up to 1500 nodes as shipped. The extra-cost
HP TopTools Value Pak can be added that increases the number of monitored nodes to 5000.
•
HP OpenView platforms - If management of a generic IP network is needed (i.e. management of
HP and other vendors’ devices):
NT platform - bridge software to HP OpenView/NT is available so that TopTools can run
under HP OpenView/NT. For more details see the TopTools web site at
http://www.hp.com/toptools .
UX platform - Management of the HP ProCurve Routing Switch 9304M and 9308M under
HP OpenView/UX is available via the separately purchased J3250M HP Hub & Switch
Management For HP OpenView-UX product.
TopTools will also run under Tivoli Enterprise and Tivoli NetView, as well as Unicenter TNG using the
proper bridges to these environments. See the TopTools web site at
http://www.hp.com/toptools for
more details.
SNMP version 2 is supported.
3 HP has made every effort to ensure the accuracy of our product testing. However, because each customer's environment is
different from HP's laboratory test environment, it is the customer's responsibility to validate the Year 2000 readiness of
these products in their own environment. Therefore, information about the Year 2000 status of HP products is provided
"as is" without warranties of any kind and is subject to change without notice. HP makes no representation or warranty
respecting the accuracy or reliability of information about non-HP products. Such information, if any, was provided by
the manufacturers of those products and customers are urged to contact the manufacturer directly to verify Year 2000
readiness. The information provided here constitutes a Year 2000 Readiness Disclosure for purposes of the Year 2000
Information and Readiness Disclosure Act.
©1999 Hewlett-Packard Company Revision 4.0 – 4/1/1999 Page: 18 of 27