HP Photosmart M730 Series - Manual (Page 35)

8 Using the Camera Setup Menu
The Camera Setup Menu allows you to set preferences for the camera’s behavior.
The Camera Setup Menu is available from the
Picture Capture, Video
Record, and Playback menus.
1. While in the Picture Capture, Video Record, or Playback menu, use
to highlight Camera Setup..., then press .
2. Use to highlight a menu option, then press to display the menu option’s sub-
menu.
3. Use to highlight a setting, then press .
4. To exit the Camera Setup Menu, press repeatedly until you return to Picture
Capture, Video Record, or Playback.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
• Automatic (Default)—For automatic adjustment of Image Display brightness based
on lighting conditions.
• Low—For extending battery life.
• Medium—For normal viewing conditions.
• High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and shutter clicks)
off and on.
On (Default), Off.
Display Timeout—Specifies the time after which the Image Display turns off if you do
not press a button.
Never, 15, 30, 45 (Default), 60 seconds.
Date & Time—Sets the date and time. See “Set the date and time” on page 5 .
USB Configuration—Specifies how a computer recognizes the camera. See
“Connecting to the computer” on page 26 .
• Digital Camera (Default)—Recognizes the camera as a digital camera using PTP
(Picture Transfer Protocol).
• Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass Storage
Device Class).
(Language)—Sets the language. See “Choose the language”
on page 5 .
Using the Camera Setup Menu 33