Harbor Freight Tools 66783 User Manual

Page 4

Advertising
background image

Page 4

For technical questions, please call 1-800-444-3353.

SKU 66783

importance that each time before using your charger, you read this and follow the

instructions exactly.
To reduce the risk of the battery explosion, follow these instructions and those

b.

published by battery manufacturer and manufacturer of any equipment you intend

to use in vicinity of battery. Review cautionary markings on these products and on

engine.

persOnal preCautiOns

11.

Someone should be within range of your voice, or close enough to come to your

a.

aid, when you work near a lead-acid battery.
Have plenty of fresh water and soap nearby in case battery acid contacts skin,

b.

clothing, or eyes.
Wear complete eye protection and clothing protection. Avoid touching eyes while

c.

working near battery.
If battery acid contacts skin or clothing, wash immediately with soap and water. If

d.

acid enters eye, immediately flood with running cold water for at least 10 minutes

and get medical attention immediately.
NEVER smoke or allow a spark or flame in vicinity of battery or engine.

e.

Be extra cautious to reduce risk of dropping a metal tool onto battery. It might

f.

spark or short-circuit battery or other electrical part that may cause an explosion.
Remove personal metal items such as rings, bracelets, necklaces, and watches

g.

when working near a lead-acid battery. A lead-acid battery can produce a short-

circuit current high enough to weld a ring or the like to metal, causing a severe

burn.
Use this charger for charging LEAD-ACID batteries only. It is not intended to

h.

supply power to a low voltage electrical system other than in an automotive

application. Do not use battery charger for charging dry-cell batteries that are

commonly used with home appliances. These batteries may burst and cause

injury to persons and damage to property.
NEVER charge a frozen battery.

i.

preparing tO Charge Battery

12.

If it becomes necessary to remove the battery from the vehicle to charge, always

a.

remove grounded terminal from battery first. Make sure all accessories in the

vehicle are off, so as not to cause an arc.
Be sure area around battery is well ventilated while battery is being charged.

b.

Gases can be forcefully blown away, by using a piece of cardboard or other non-

metallic material such as a fan.
Clean battery terminals. Be careful to keep corrosion from coming in contact with

c.

eyes.

Advertising