Saw chain filing and file gauges, Technical data – Husqvarna 1153181-95 User Manual
Page 40
40 – English
TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for Husqvarna chain saw models 570, 576 XP and 576 XPG. These
chain saw models equipped with either of the listed bar and sawchain combinations, fulfills the requirements according
to ANSI B 175.1-2000 (Gasoline Powered Chain Saws - Safety Requirements).
Note: ATM (Armour Tip Medium) is a designation for a hard nose bar with nose radius 1,33”.
Saw chain filing and file gauges
Bar
Chain
Length, inch
Pitch, inch
Gauge, inch
Max. nose radius
Type
Drive link count
16
3/8
0,058
11T
Husqvarna H42,
Husqvarna H48
60
18
3/8
0,058
68
20
3/8
0,058
72
24
3/8
0,058
84
28
3/8
0,058
92
16
3/8
0,050
Husqvarna H46,
Husqvarna H47,
Husqvarna H47S,
Husqvarna H82
60
18
3/8
0,050
68
20
3/8
0,050
72
24
3/8
0,050
84
28
3/8
0,050
93
32
3/8
0,050
105
!
WARNING! This chain saw model is capable of severe kickback that could result in serious injuries
to the user. Do not operate this saw unless you have extraordinary cutting needs and experience
and specialized training for dealing with kickback. Saws with significantly reduced kickback
potential are available. Always use the safest saw and cutting equipment applicable to your cutting
need.