Hypercom IN-tact 1201 - Manual (Page 2)

Dial communication over IP.
IN-tact ® 1201
Ease of Use
• Simple and intuitive Web management facility allows the device to be pre-configured
prior to delivery to the point of installation,saving time and training
• SNMP capabilities along with the Web interface allow remote upgrades
• Easy-to-install procedure allows devices to be delivered fully configured to customer
locations. This allows the end user to start using the IN-tact 1201 right out of the box,
without the need for additional programming or configuration.
Security
• Industry-standard SSL connection to a remote SSL server ensures secure transactions
over the Internet
• Integrated Web server allows secure management via a standard Web browser
• SNMP services for use with existing customer-provided management systems
• Redundant TCP/IP and connection to backup host destinations
• Transactions are delivered seamlessly to a backup host in the event the primary host
is not available.
Cost Savings
• Faster transaction times utilizing IP rather than dial
• Connects to existing dial terminals or ATMs, no need to replace with more expensive IP
terminals, no time lost training employees or learning a new device.
World Headquarters:
Hypercom Corporation | 2851 W. Kathleen Road, Phoenix, Arizona 85053, USA
Tel: +1.602.504.5000 | Fax: +1.602.504.4655 | Web: www.hypercom.com
Global Locations:
North America | Latin America | Asia/Pacific Rim | Europe | Middle East | Africa | Australia
Technical Specifications:
Protocols
• Dial port: Visa I/II spoofed, SDLC, asynchronous,
transparent
• Modem: V.21/Bell 103, V.33/Bell 212A, V.22bis,
V.29, V.34, V.90
• Ethernet LAN: TCP/IP, HTTP, HTTPS, SSL
and SNMP
External Power Supply
• Input: 110/220, 50/60 Hz
• Output: 24 VDC, 1 A
Footprint
• 6.0 in x 8.0 in x 1.5 in/15.2 cm x 20.3 cm x 3.8 cm
Weight
• .9 lbs/0.41 kg
Environment
• Temperature: 0-40°C/32-104°F
• Humidity: Max 95% RH, non-condensing
• Altitude: 0-10,000 ft/0-3.048 meters
• Vibration: 0.03 in, maximum displacement to 0,05G
sine peak, 3 orthogonal axes, 5-500-5 Hz
Reliability
• 100,000 hours (MTBF calculated)
Certifications
• Certified to global and local standards including CE
© 2007 Hypercom Corporation, all rights reserved. Hypercom is a
registered trademark of Hypercom Corporation. The Hypercom logo is
a trademark of Hypercom Corporation. All other products or services
mentioned in this document are trademarks, service marks, registered
trademarks or registered service marks of their respective owners.
Product Specifications subject to change without notice.
940421-001, Rev F March 2007
This product includes software developed by the University of California, Berkeley and its contributors.
This product includes cryptographic software written by Eric Young ([email protected])