Husqvarna 327RJx - Manual (Page 26)

26 – English
TECHNICAL DATA
Technical data
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
327RJx
Engine
Cylinder displacement, cu.in/cm
3
1,50/24,5
Cylinder bore, inch/mm 1,34/34
Stroke, inch/mm 1,06/27
Idle speed, rpm 2700
Recommended max. fast idle speed, rpm 11000-11700
Speed of output shaft, rpm 9300
Max. engine output, acc. to ISO 8893 0,9/8400
Catalytic converter muffler Yes
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro MB
Spark plug Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 10,8/4,9
Sound levels
(see note 1)
Equivalent sound pressure level at the user
′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
93/98
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 3,0/1,6
At idle, left/right handles, max.: 3,4/1,7
At max. speed, left/right handles, min.: 3,4/2,8
At max. speed, left/right handles, max.: 4,5/4,6
Approved accessories Type Cutting attachment guard, Art. no.
Arbor shaft thread M10
Plastic blades Tricut Ø 300 mm 503 93 42-02
Grass blade/grass cutter
Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02
Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02
Trimmer head
T25 503 97 71-01 / 503 93 42-02
S35 503 97 71-01 / 503 93 42-02
T35, T35x 503 97 71-01 / 503 93 42-02