Adjusting the volume, Muting the sound, Changing the picture mode – HP PL4272N User Manual
Page 34: Changing channels, Selecting the last channel, Selecting a favorite channel, Changing the picture mode changing channels
24
HP HDTV User’s Guide
Adjusting the Volume
To increase or decrease the sound level, press:
■
The remote control Volume buttons.
Or
The TV Volume buttons.
The indicator bar on the TV shows the increase or 
decrease.
Muting the sound
1
Press the Mute button on the remote control to 
temporarily turn off the sound. 
2
Press the Mute button again to restore the sound 
back to the previous level.
Changing the Picture 
Mode
Press the Picture button on the remote control to display 
the currently selected video mode. Keep pressing the 
Picture button until you reach the desired picture. The 
Picture modes are:
■
Standard: Good for normal viewing conditions 
with low room lighting.
■
Movie: Good for watching movies in a darkened 
room. Provides a soft, film-like picture.
■
Vivid: Good for viewing in a well-lit room, 
enhances the contrast and sharpness.
■
User: Displays the custom settings that you 
configured in the OSD. For more information 
about defining the picture settings, see “Using the 
Picture Menu” on page 30.
Changing Channels
To change to the next higher or lower channel, press:
■
The remote control Ch+ or Ch– buttons.
Or
The TV Channel buttons.
To change to another channel, enter a one-digit, two-
digit, or three-digit number, or press the channel up or 
down buttons.
To select a specific channel number (for example, 
channel 25), complete the following procedure within 
four seconds:
1
Press the 2 button on the remote control.
2
Press the 5 button.
3
Press Enter.
To select a specific digital channel number (for 
example, 14-2) complete the following procedure 
within four seconds:
1
Press the 1 button on the remote control.
2
Press the 4 button.
3
Press the – (dash) button.
4
Press the 2 button.
5
Press Enter.
Selecting the last channel
Press the Last button on the remote control to view the 
previous channel that you viewed.
Selecting a favorite channel
You can quickly select a favorite channel by using the 
Fav button on the remote control.
Press the Fav button on the remote control to view a list 
of your favorite channels. Press an arrow button to 
select a channel from the list, and then press OK.
Ch+
Ch-