Paper messages, Card is inserted incorrectly, Card is damaged – HP Photosmart C4780 User Manual

Page 78: Card is not fully inserted

Advertising
background image

If more than one memory card is inserted, an error message will appear on the display.
Remove the additional memory card to resolve the problem.
Cause: Multiple memory cards were inserted in the product.

Card is inserted incorrectly

Solution: Turn the memory card so that the label faces up and the contacts are
facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Cause: The card was inserted backwards or upside down.

Card is damaged

Solution: Reformat your memory card in your camera or format your memory card
in a computer by selecting the FAT format. For more information, see the
documentation that came with your digital camera.

CAUTION:

Reformatting the memory card will delete any photos stored on the

card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.

Cause: You may have formatted the card on a Windows XP computer. By default,
Windows XP will format a memory card of 8 MB or less and 64 MB or more with the
FAT32 format. Digital cameras and other devices use the FAT (FAT16 or FAT12)
format and cannot recognize a FAT32 formatted card.

Card is not fully inserted

Solution: Turn the memory card so that the label faces up and the contacts are
facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.

After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Cause: The memory card was not fully inserted.

Paper messages

The following is a list of paper-related error messages:

Paper upside down

Paper orientation error

Ink is drying

Chapter 12

76

Solve a problem

Solve a problem

Advertising
This manual is related to the following products: