Hitachi 53SBX10B - Manual (Page 18)

CONNECTING EXTERNAL VIDEO SOURCES
18
CONNECTING A COMPONENT SOURCE TO VIDEO 4: Y-PBPR.
1.
Connect the cable from the Y OUT of the Laserdisc/DVD player to the INPUT (Y) jack, as shown on the TV set below.
2. Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player to the INPUT (PB) jack.
3. Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player to the INPUT (PR) jack.
4. Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player to the INPUT (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player to the INPUT (AUDIO/L) jack.
6. Press the INPUT button to view the program from the Laserdisc/DVD player. The VIDEO icon disappears automatically after
approximately eight seconds.
7. Press the INPUT button to return to the previous channel.
P B
P R
AUDIO TO HI-FI
MONITOR
OUT
INPUT 1
AUDIO
(MONO)
L
R
AUDIO
L
R
S-VIDEO S-VIDEO
VIDEO VIDEO
AUDIO
L
R
(MONO)
S-VIDEO
VIDEO Y/VIDEO
R L
AUDIO
L
R
INPUT 2 INPUT 4
(MONO)
ANT A
TO
CONVERTER
ANT B
Rear Panel of Television
OUTPUT
P R/ C R P B/ C B Y L R
AUDIO VIDEO
DVD Player
Hitachi Model or
Similar Model
Back of
DVD Player
NOTE: 1. You may use standard video signal or 480i signal for INPUT:4.
2. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
3. See page 12 for tips on REAR PANEL CONNECTIONS.