English 6 – Philips GC1010 User Manual

Page 6

Advertising
background image

General description

A Spray nozzle (GC1121/1120/1115/1015)
B Filling opening
C Spray button T (GC1121/1120/1115/1015)

D Steam control

-

O = no steam

- q = moderate steam
- w = maximum steam
- x = Calc-Clean function

E Extra-steam function (press steam control) (GC1121/1120)
F Temperature dial
G Temperature light
H Cord
I Type plate
J Water tank

Important

Read these instructions for use carefully before using the appliance and save them for future
reference.

◗

Check if the voltage indicated on the type plate corresponds to the local mains voltage
before you connect the appliance.

◗

Only connect the appliance to an earthed wall socket.

◗

Do not use the appliance if the plug, the cord or the appliance itself shows visible damage, or
if the appliance has been dropped or is leaking.

◗

Check the cord regularly for possible damage.

◗

If the mains cord is damaged, always have it replaced by one of the original type in order to
avoid a hazard.

◗

Never leave the appliance unattended when it is connected to the mains.

◗

Never immerse the iron and the stand, if provided, in water.

◗

Keep the appliance out of the reach of children.

◗

The soleplate of the iron can become extremely hot and may cause burns if touched.

◗

Do not allow the cord to come into contact with the soleplate when it is hot.

◗

When you have finished ironing, when you clean the appliance, when you fill or empty the
water tank and also when you leave the iron even for a short while: set the steam control to
position O, put the iron on its heel and remove the mains plug from the wall socket.

◗

Always place and use the iron and the stand, if provided, on a stable, level and horizontal
surface.

◗

Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the
water tank.

◗

This appliance is intended for household use only.

Before first use

1

Remove any sticker or protective foil from the soleplate.

2

Let the iron heat up to maximum temperature and pass the iron over a piece of damp cloth
for several minutes to remove any residues from the soleplate.

B

The iron may give off some smoke when you use it for the first time.This will cease after a short
while.

ENGLISH

6

Advertising
This manual is related to the following products: