Before you call for service – Hotpoint LEB356 User Manual

Page 28

Advertising
background image

28

Safety Instructions

Operating Instructions

Care and Cleaning

Troubleshooting T

ips

Customer Service

Before You Call For Service…

Troubleshooting Tips

Problem

Possible Causes

What To Do

Oven door will

Oven too hot.

Turn the Oven Temperature knob to CLEAN.

not lock

The glowing oven cleaning light after the knob is turned

indicates the oven is too hot from previous use. To cool

the oven, open the door wide, and allow the oven to cool.

After the oven has cooled, close the door and slide the

latch handle all the way to the right.

Door latch handle may not

Lift the cooktop and pull the door latch handle

be fully extended from the

into the lock position.

Hide-A-Way (on some
models) position.

Oven not clean after

Oven controls not

See the Using the self-cleaning oven section.

a clean cycle

properly set.

Oven was heavily soiled.

Clean up heavy spillovers before starting the clean

cycle. Heavily soiled ovens may need to self-clean

again or for a longer period of time.

CLEAN light flashes

Oven controls not

Move the door latch handle to the right before

properly set.

setting the Oven Temperature knob to CLEAN.

Oven makes

This is the sound of the

This is normal.

clicking noise

heating element turning
off and on during
cooking functions.

“F— and a number

You have a function

If a function error code appears during the self-

or letter“ flash in

error code.

cleaning cycle, check the oven door latch. The latch

the display

may have been moved, even if only slightly, from the

locked position. Make sure the latch is moved to the

right as far as it will go. Turn the Oven Temperature

knob to OFF. Allow the oven to cool for one hour.

Put the oven back into operation.

If the function code repeats.

Disconnect all power to the range for at least 30

seconds and then reconnect power. If the function

error code repeats, call for service.

“Burning” or “oily”

This is normal in a new

To speed the process, set a self-clean cycle for a

odor emitting from

oven and will disappear

minimum of 3 hours. See the Using the self-

the vent

in time.

cleaning

oven section.

Strong odor

An odor from the insulation

This is temporary.

around the inside of the oven
is normal for the first few times
the oven is used.

Fan noise

A cooling fan may

This is normal. The cooling fan will turn off and on.

automatically turn on and
off to cool internal parts.

Advertising
This manual is related to the following products: