Hotpoint EW86 - Manual (Page 11)

The controls
11
Switch on the electricity supply to the cooker at the Cooker Control Unit.
Hob Controls Top
Oven
Control Timer Main
Oven
Control
Top Oven Neon Main Oven Neon
Grill
Control
Hob Controls
(EW83/86 only)
Hob Controls
(EW73/76 only)
Left Rear Control
(EW83/86 only)
As each control knob is turned clockwise, numbers from 1 - 6 on the control
knob increase. Setting 6 is the highest/hottest and gives 100% power.
Setting 1 is the lowest/coolest and gives about 7% power.
Variable power is obtainable on each of the heating areas by selecting any
number between 1 & 6.
As each control knob is turned clockwise, numbers from 6 - 1 on the control
knob decrease. Setting 6 is the highest/hottest. Setting 1 is the
lowest/coolest. These are 6 fixed positions for cooking.
This is to control a dual circuit plate with two elements. By turning the knob
clockwise the whole hotplate is switched on, numbers 1-4 on the control
knob, 4 is the highest setting. With the knob turned anti-clockwise, only the
inner part of the hotplate is switched on, this is also indicated by numbers 1-
4 on the control knob, 4 is the highest setting. Variable power for either the
whole or the inner part of the hotplate is obtained by selecting any number
between 1 & 4.
The off position is identified by an ‘0’.
The hob hot warning light will operate soon after any of the heating areas
are switched on. It will remain illuminated until the ceramic surface has
cooled down (EW83/86 only).