Philips GC3540 - Manual (Page 9)

Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
 Put the mains plug in an earthed wall socket.
The amber temperature light goes on (Fig. 6).
 When the temperature light goes out, wait a while before you
start ironing.
The temperature light goes on from time to time during ironing.
using the appliance
Note: The iron may give off some smoke when you use it for the first time.
This stops after a short while.
steam ironing
1 Make sure that there is enough water in the water tank.
 Set the recommended ironing temperature (see chapter ‘Preparing
for use’, section ‘Setting the temperature’).
 Set the appropriate steam setting. Make sure that the steam
setting is suitable for the set ironing temperature: (Fig. 7)
1 - 2 for moderate steam (temperature settings 2 to 3)
3 - 4 for maximum steam (temperature settings 3 to MAX)
Note: The iron starts to produce steam as soon as it has reached the
set temperature.
Note: If the selected ironing temperature is too low (MIN to 2), water may
drip from the soleplate (see chapter ‘Features’, section ‘Drip stop’).
ironing without steam
1 Set the steam control to position 0 (= no steam) (Fig. ).
 Set the recommended ironing temperature (see chapter ‘Preparing
for use’, section ‘Setting the temperature’).
,
-
-
EnGlish 9