HONDA EM6500is - Manual (Page 22)

20
CONTROL & FEATURES
i-Monitor Display Mode 2 Power Output
i-Monitor Display Mode 3 Engine RPM
i-Monitor Display Mode 4 Battery Voltage
This mode displays an approximate generator output on the display
screen. The output is expressed in VA (volt-amperes). The output
value is not an exact measurement and should be regarded as a
reference only. Power output will not display until a load is connected
to the generator.
When the i-Monitor is in this mode, the engine’s speed, expressed in
revolutions-per-minute (RPM) is displayed.
This mode displays the battery condition, expressed in Volts DC.
07/03/13 16:23:17 31Z11600_021