HP 72H3482 - Manual (Page 18)

3 Connecting to a Windows NT Server 3.51
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2 installed.
• IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1
Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98
• Microsoft Windows 95 SR2 media.
• Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
• Adapter Mode Auto16 Compatible
• Configuration Automatic
• Interrupt 10
• I/O Address A20
• RAM Address D8000-D9FFF
• RAM Size 16 Kb
Procedure
1 With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card
into an ISA slot.
2 Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3 After the machine boots, select option 2 “IBM Auto 16/4 Token-Ring ISA
Configuration using LANAID” and hit enter.
4 When prompted, press any key to continue with the LANAID setup
program.
5 Type “/VIEW” and verify the settings as listed above under the heading
“Device Configuration.”
6 Make any changes, exit LANAID, and remove the drivers diskette.
7 Reboot the machine and allow it to boot to Windows 95.
8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR
adapter card.
9 Click on “Next”, and then click on “Finish.”