Installing hp dynamic voice, Qvwdoolqjwkh+3'\qdplf9rlfhdxglrfrghf, Xrw\]juu19-bwjvrl?xrlnxw@rwmx`\""!6n – HP Jornada 520 User Manual

Page 35: Xrw\]juu19-bwjvrl?xrlnxw@rwmx`\7

Advertising
background image

Chapter 3

|

Connecting to your desktop PC

|

31

Optional components

audio card/speakers for sound

modem and/or Ethernet LAN connection for remote synchronization

Microsoft Internet Explorer 4.0 or higher for Mobile Channels or Mobile
Favorites support. (Internet Explorer 5.0 is included on the ActiveSync
CD-ROM.)

additional 153 MB of disk space for Microsoft Outlook 2000. 24 MB
system RAM recommended. (Microsoft Outlook 2000 is included on the
ActiveSync CD-ROM.)

,QVWDOOLQJWKH+3'\QDPLF9RLFHDXGLRFRGHF

HP Dynamic Voice is the default format for recording voice notes on your HP
Jornada. You can transfer recordings from your HP Jornada to your desktop
PC; however, before you can play a voice note recorded in HP Dynamic Voice
on your desktop PC, you must install the HP Dynamic Voice compressor/
decompressor (codec). The procedure for installing the codec depends on
your operating system. Follow the appropriate instructions below for your
version of Microsoft Windows.

=XRW\]JUU19-bWJVRL?XRLNXW@RWMX`\""!6N

1. Insert the HP Jornada CD-ROM into a drive on your desktop PC.

2. In the HP Dynamic Voice folder on the HP Jornada CD-ROM, open

the Win9x folder.

3. Right-click the hpdynv.INF file, and then click Install on the pop-up

menu.

4. If you are prompted to insert a disk, make sure that your HP Jornada

CD-ROM is inserted, and then click OK.

5. Installation should begin automatically, and you should see the

Copying Files dialog box.

6. If you see a message stating that the hpdynv.acm file is not found,

click Browse, and then select the file from the Win9x folder in the HP
Dynamic Voice folder on the HP Jornada CD-ROM.

=XRW\]JUU19-bWJVRL?XRLNXW@RWMX`\7=

1. Insert the HP Jornada CD-ROM into a drive on your desktop PC.

2. On

the

Start menu, point to Settings, and then click Control Panel.

3. In Control Panel, click Multimedia.

4. On

the

Devices tab, select Audio Compression CODEC.

5. Click

Add.

Advertising