Viewing the summary screen – HP VECTRA VL800 User Manual
Page 18
1 Setting Up and Using Your PC
Viewing the Summary Screen
18
Viewing the Summary Screen
The Summary Screen gives you a summary of the current configuration of
your PC (for example: BIOS version, CPU speed, memory module size, and
installed mass storage devices).
It is recommended that you check the configuration of your PC when you
first use it and each time after you install, remove, or upgrade accessories.
To check the configuration:
1
Turn on the display and then the PC. If the PC is already turned on, save
your data and exit all programs, then restart the PC. Consult your
operating system documentation for any special instructions concerning
turning off and restarting your PC.
2
When the start-up logo appears on your display, press
Esc
. This takes
you to the Summary Screen. (To go immediately into the Setup
program, and bypass the Summary Screen, press
F2
instead of
Esc
).
The Summary Screen is displayed for only a short time.