Harbor Freight Tools CHICAGO ELECTRIC 67255 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 67255
consider work area environment. 3.
Use extreme caution when cutting a.
small size brush and saplings
because the slender material may
catch the saw chain and be whipped
toward you or pull you off balance.
Do not operate a chain saw in a tree
b.
unless specifically trained to do so.
When cutting a limb that is under
c.
tension be alert for spring back so
that you will not be struck when
the tension in the wood fibers is
released.
Do not expose chain saw to rain.
d.
Do not use chain saw in damp or e.
wet locations.
Do not use chain saw in presence of
f.
flammable liquids or gases.
guard against electric shock. 4.
Prevent body contact with grounded
surfaces. For example: metal pipes,
wire fences.
keep children away.
5.
Do not let visitors contact chain saw a.
or extension cord.
All visitors should be kept away from
b.
work area.
store idle chain saw. 6.
When not in use, chain saws should a.
be stored in a dry, and high or
locked-up place – out of the reach of
children.
When storing saw, use a scabbard
b.
or carrying case.
don’t Force chain saw 7.
It will do the job better and safer at
the rate for which it was intended.
use right tool.
8.
Cut wood only. a.
Don’t use chain saw for purpose b.
not intended – for example – Don’t
use chain saw for cutting plastic,
masonry, non-wood building
materials.
dress properly. 9.
Do not wear loose clothing or a.
jewelry. They can get caught in
moving parts. Rubber gloves and
non-skid footwear are recommended
when working outdoors.
Wear protective hair covering to
b.
contain long hair.
use ansi-approved safety 10.
glasses.
Also use safety footwear; snug fitting
clothing; protective gloves; steel-toed
boots; hearing and head protection.
carrying saw.
11.
Carry the chain saw by the front
handle with the saw stopped, finger
off the switch, the guide bar and saw
chain to the rear.
maintain chain saw with care.
12.
Inspect chain saw cords periodically a.
and if damaged, have repaired by
authorized service facility.
Keep cord clear of the chain
b.
and operator at all times. Never
carry saw by the cord or pull it to
disconnect from receptacle. Keep
cord from oil and sharp edges.
Inspect extension cords periodically
c.
and replace if damaged.
Keep tools sharp and clean for better
d.
and safer performance.
Follow instructions for lubricating
e.
and changing accessories.