Hobart Welding Products Stickmate 205 AC - Manual

230 Volt
Stickmate ® 205 AC
AC Stick (SMAW) Arc Welding Power Source
Applications:
Farms Hobbyists
Ranches Maintenance
Ornamental Iron Individuals
Garages
Includes:
15-ft. (4.5 m) electrode cable with heavy-duty holder
10-ft. (3 m) work cable with clamp
Power cord with plug
Rated Welding Output
165 A at 25 VAC,
20% Duty Cycle, 50/60 Hz
Max. Open-
Circuit Voltage
80 V
Welding Amperage
Range
30 – 205 A
Amps Input at Rated Output,
230 V, 50/60 Hz
47.5
Dimensions
H: 18-3/4 in. (476 mm)
W: 12-3/4 in. (323 mm)
D: 17-1/2 in. (445 mm)
Net
Weight
83 lb.
(38 kg)
Accu-Set is an exclusive design for accurately controlling amperage or heat output.
The precise control of the Stickmate allows the operator to adjust output by as little as 1-amp increments. Adjustments
can be made while welding to achieve desired heat level, unlike the step control design on
competitive products.
Duty cycle increases as amperage setting decreases. 100% duty cycle at 90 A, 25 V.
Assists with arc starting and arc stability.
Varnish protects and lengthens the life of the coils inside for increased reliability.
The cooling fan runs continuously and helps to extend the life of the power source.
Five-year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers);
and one year on guns.
Accu-Set ™ amperage indicator
Infinite current control
Increasing duty cycle
Max. 80 open-circuit voltage
Fully varnished magnetic coils
Forced-draft cooling fan
Hobart’s 5/3/1 Warranty
216440
June 2012
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Features Benefits
Specifications
(SUBJECT TO CHANGE WITHOUT NOTICE.)
T he Stickmate 205 AC Stick welding power
sources have the control to get the exact heat
you need — always. Also, these machines allow
weld time to increase when amperage decreases.
They have the range and muscle to handle many
Stick welding, hard surfacing, and cutting jobs.
At the same time, they have the precision for low
hydrogen and special alloy electrodes. Recommended
for a variety of electrodes 1/16 – 5/32 in diameter.
Accu-Set ™ design provides accurate heat control
with infinite amperage control. This Stick welder
also allows a higher duty cycle when amperages
decrease to give you more arc time when welding
thinner materials.
#500502