Add a new printer to the list. (see, To add an hp jetsend, Enabled printer to the list – HP 8100C User Manual
Page 28
Step 2 Choose a destination
27
4
Press
to begin sending the document.
●
If you sent a single-sided document using the ADF, the
process is finished.
●
If you sent a double-sided document using the ADF, wait for
the first side to finish. Then, reload the document with the
second side facing up, last page on top, and press
again.
●
If you used the glass, remove the page when it is finished.
Then, place the next page face down on the glass and press
. After the last page, press
S
END
(
F4
).
To add an HP JetSend-enabled printer to the list
1
Press
P
RINT
(
F3
). The list of HP JetSend-enabled printers
appears.
2
Press
N
EW
(
F3
).
3
Type the DNS name or IP address for the HP JetSend-enabled
printer you want to add. If you do not know this information, see
the administrator.
4
to finish sending a document to the new HP JetSend
enabled printer.
Note
Once the list contains 64 printers, the
N
EW
(
F3
) key disappears. Before
adding more printers, you must delete at least one existing printer from
the list. To delete a printer, use the and keys to select it and press
D
ELETE
(
F3
).