HONDA 08V67-TE0-100A - Manual (Page 10)

10 of 15
AII 37561-38377 (0711) © 2007 American Honda Motor Co., Inc. – All Rights Reserved.
742408CE
BACK-UP SENSOR
HARNESS
WIRE TIES
WIRE
TIE
TRUNK ROOM
VEHICLE
HARNESS
28. Install one wire tie with clip to the holder with the fuse
case, and attach the wire tie to the vehicle harness.
29. Remove the vehicle grommet from the rear panel.
30. Route the back-up sensor 6-pin connector through
the hole in the rear panel, and seat the harness
grommet in the rear panel hole.
31. Secure the back-up sensor harness to the vehicle
harness with one wire tie.
761402AE
FUSE
CASE
WIRE TIE
WITH CLIP
VEHICLE
GROMMET
VEHICLE
HARNESS
742409BE
VEHICLE
HARNESS
Inside Outside
BACK-UP SENSOR
HARNESS
GROMMET
Hole from which
the grommet has
been removed.
GROMMET
BACK-UP
SENSOR
HARNESS
6-PIN
CONNECTOR
BACK-UP
SENSOR
HARNESS
WIRE TIE
www.collegehillshonda.com