Troubleshooting, Printer hardware problems, Troubleshooting printer hardware problems – HP A430 User Manual
Page 38
8
Troubleshooting
The HP Photosmart A430 series printer is designed to be reliable and easy to use. This
section answers frequently asked questions about using the printer and printing without
a computer. It contains information about the following topics:
●
●
●
●
For troubleshooting information about using the HP Photosmart software and printing
from a computer, see the electronic Help. For information about viewing the electronic
Help, see
.
For information about troubleshooting issues involving the HP Photosmart camera, see
the camera User Guide.
Printer hardware problems
Before contacting HP support, read this section for troubleshooting tips or go to the online
support services at
.
Note
If you want to connect the printer to a computer, HP recommends using a
USB cable of less than 3 meters (10 feet) in length. The supplied USB cable meets
this recommendation.
The Status light is flashing red.
Cause The printer requires attention. Try the following solutions.
Solution
●
Check the camera image display for instructions. If the printer is connected to
a computer, check the computer monitor for instructions.
●
Turn off the printer.
If the optional HP Photosmart Internal Battery is not installed in the printer,
unplug the printer power cord. Wait about 30 seconds, and then plug the power
cord back in. Turn on the printer.
If the optional HP Photosmart Internal Battery is installed in the printer, unplug
the printer power cord if it is plugged in. Open the battery compartment cover
and remove the battery. Wait about 30 seconds, and then reinstall the battery.
Plug in the power cord. Turn on the printer.
●
If the Status light continues to flash, go to
or contact HP
support.
The On light flashed briefly after I turned the printer off.
Solution This is a normal part of the power-down process. It does not indicate a
problem with the printer.
HP Photosmart A430 series User Guide
35