Harley-Davidson CLASSIC CHROME H4808 - Manual (Page 16)

16
Assembly
TM
Steering
Bushing
Vehicle
Frame
Neck
• Position the vehicle frame so that the front faces you.
• Fit a steering bushing underneath the neck of the
vehicle frame.
• Insert a #8 x 3 /
4
" screw into each end of the steering
bushing and tighten.
Front View
21
• Fit the headlight lens onto the headlight housing.
• Insert three #8 x 3 /
4
" screws into the headlight lens
and tighten.
Headlight
Lens
Headlight
Housing
22
Front Fork
Lower Hole
Lower
Hole
Front Fork
Cover
• Fit the front fork into the front fork cover.
• Insert two #8 x 1 /
2
" screws into the lower holes in the
front fork and tighten.
23
24
Headlight
Assembly Center
Holes
Front Fork
Assembly
• Position the headlight assembly with the lens down on a
flat surface.
• Fit the front fork assembly onto the back of the headlight
assembly, as shown.
• Insert two #8 x 3 /
4
" screws through the center holes in
the front fork assembly and into the headlight assembly.
• Tighten the screws.