Hitachi 35TX59K - Manual (Page 29)

-SET UP- FUNCTIONS
29
right.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV1 mode, set -AIR/CABLE-
select to CATV2.
• AUTOPROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP (
) or
DOWN ( ) buttons.
If the MENU button is pressed while the autoprogramming function is engaged,
programming will stop.
See CHANNEL MEMORY to add or erase additional channels.
• CHANNEL MEMORY
Use this function after AUTOPROGRAM to add or erase additional channels to the
remote control CHANNEL
, buttons.
Add or erase additional channels while still in CHANNEL MEMORY using the
CHANNEL
, buttons or number buttons and then add or erase using the CURSOR