A typical wash programme – Hotpoint WM82 User Manual
Page 10
IMPORTANT INFORMATION: Before selecting a programme, ensure the mains
button is in the ‘OFF’ position.
Add detergent and or
conditioner to the
dispenser drawer, see
pages 14-15. Refer to
detergent manufacturer’s
dosage instructions.
Select required wash
programme by turning
the wash dial clockwise,
you will hear a click as
the pointer aligns at the
start position.
Switch on both the
water & electricity
supply at the mains.
Select optional wash
features by pressing
button, a coloured band
indicates selection.
Sort laundry by label
into groups with the
same wash
requirements and
load appliance.
Switch ‘ON’, the door will
lock and after a few
seconds the indicator
light will illuminate
throughout the wash
programme.
1-2 minutes after
completion of the wash
programme the
indicator light will go
out and the door can
be opened.
Switch ‘OFF’ after use.
Close door by applying
pressure at the
3 o’clock position.
4
5
Select reduced spin (if
required) by turning the
variable spin speed
control dial.
6
7
1
2
3
8
9
Note: We recommend on
completion of your wash
programme that you switch
off both the electricity and
water supply to the
appliance.
WARNINGS
●
Do not allow children to
play with the appliance
or tamper with the
controls.
●
Do not overload
appliance! It may
damage laundry and
reduce the quality of
the wash.
●
Do not attempt to open
the door when the
indicator light is on.
A Typical Wash Programme
10