Hitachi 50C20A - Manual (Page 57)

Lamp Replacement
1.
Turn off the main power switch and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool
down before replacing it.
CAUTION: The lamp is very hot and may cause fire or severe burns. Wait at least 30~45 minutes to allow the
lamp to cool before proceeding with lamp removal.
2. Remove the front cover from the TV set. This is held by snap on. Pull the cover outwards until the quick snap
on disengages.
NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in
accordance with applicable environmental laws. For lamp recycling and disposal information, go to
www.lamprecycle.org. For product recycling and disposal information, contact your local government
agency or the Electronic Industries Alliance at www.eiae.org (in the US) or the Electronic Product
Stewardship Canada at www.epsc.ca (in Canada). For more information, call “1-800-HITACHI.”
57
Lamp Replacement
Lamp Replacement
Hg
120V
FRONT COVER
PULL
LAMP COMPARTMENT