Husqvarna 1030 BioClip - Manual (Page 11)

English –
9
Presentation
These instructions describe two machine models,
Rider 1030 Bioclip and Rider 1200.
Rider 1030 Bioclip and Rider 1200 are fitted with
Vanguard V-Twin engines from Briggs & Stratton of
18 h.p.
Rider 1030 has a cutting unit with Bioclip function
and a mowing width of 1030 mm.
The power transmission from the engine is handled
by a hydrostatic gearbox which enables stepless
variation of the speed with the foot pedals.
There is one pedal for driving forward and one for
reversing.
PRESENTATION
Location of the controls
1. Ignition lock
2. Choke lever
3. Throttle control
4. Counter
5. Lever for adjustment of cutting height
6. Lifting lever for cutting unit with lock button
7. Speed limiter for reversing
8. Speed limiter for driving forward
9. Brake pedal
10. Lock button for parking brake
11. Lever for adjustment of seat
12. Fuel tank cap
13. Main lock
14. Lever to disengage the drive
The cutting unit on Rider 1200 has rear ejection
with a moving width of 1200 mm.
8 7 6 5 4 3 2 1 13
9 10 11 12 13 14