Heated handles, Electrical carburettor heating, Maintenance – Husqvarna 1153181-26 User Manual
Page 39
Advertising
MAINTENANCE
English
–
39
Heated handles
576 XPG
On models with the model code XPG both the front
handle bar and the rear handle are equipped with
electrical heating coils. These are supplied with electricity
from a generator built into the chain saw.
Electrical carburettor heating
576 XPG
If this chain saw has the model code XPG then it is
equipped with an electrically heated carburettor. The
electrical heating prevents icing in the carburettor. A
thermostat regulates heating so that the carburettor
always has the correct working temperature.
Advertising
See also other documents in the category Husqvarna Petrol tool:
- 455 Rancher (44 pages)
- 372XPW (44 pages)
- 327P4 (36 pages)
- 436 LI (44 pages)
- 115 13 81-26 (44 pages)
- 318 (24 pages)
- 320 (25 pages)
- 385XP (40 pages)
- 390XP (44 pages)
- OPERATORS MANUAL CS 2159W (44 pages)
- 371XP (36 pages)
- 362XP (44 pages)
- 365 (40 pages)
- 372XP (40 pages)
- 1151375-95 (44 pages)
- 1153179-95 (44 pages)
- 1151436-95 (44 pages)
- 232R (36 pages)
- 232RD EN (30 pages)
- 232R (44 pages)
- 232RD (44 pages)
- 235R (52 pages)
- 23 COMPACT (15 pages)
- 50 Special (42 pages)
- 135E (420 pages)
- 576 XP EPA III (44 pages)
- 246 (36 pages)
- 236E (23 pages)
- 1151002-95 (45 pages)
- 576XP AutoTune (44 pages)
- 1151338-95 (44 pages)
- 1153183-26 (44 pages)
- 570 (44 pages)
- 575XP (48 pages)
- 353 E-tech (44 pages)
- EPA III (132 pages)
- 394XP (36 pages)
- 340E EPA II (48 pages)
- TrioBrake 345e EPA II (44 pages)
- 261 (36 pages)
- TAC 345e (44 pages)
- 1153136-95 (36 pages)
- 445 (44 pages)
- 450e (44 pages)
- 346XP/ 351 (44 pages)