Husqvarna 225L Lite - Manual (Page 21)

English –
21
TECHNICAL DATA
Technical data
Engine
Cylinder capacity, cu. in/cm 3
Cylinder bore, inch/mm
Stroke length, inch/mm
Recommended max. speed, rpm
Max. speed, should not be exceeded. rpm
Idling speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Noise levels
Equivalent noise pressure level at the user’s
ear, measured according to prEN 31806
and ISO 7917, dB(A), min/max:
Equivalent noise power level at the user’s
ear, measured according to prEN 31806
and ISO 10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to prEN 31806 and ISO 7916,
m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
225L/LD
1,55/25,4
1,34/34
1,10/28
11 000-12 000
14 000
2 700
10 000
0,9 kW/9 000 rpm
Walbro MB/CD
Champion RCJ 7Y
0 02/0,5
Walbro WT
1,06/0,5
12,6/5,7 (LD 13,2/6,0)
95/99
104/109
2,8/2,0
2,8/2,0
2,6/2,8
5,0/5,0
232L
1,88/30,8
1,38/35
1,26/32
11 000-12 000
14 000
2 700
10 000
1,1 kW/8 400 rpm
Walbro MB/CD
Champion RCJ 7Y
0 02/0,5
Walbro WT
1,06/0,5
13,2/6,0
92/100
107/110
2,5/2,3
4,0/3,0
3,8/2,7
6,8/3,4
225L Lite
1,55/25,4
1,34/34
1,10/28
11 000-12 000
14 000
2 700
10 000
0,9 kW/9 000 rpm
Walbro MB/CD
Champion RCJ 7Y
0 02/0,5
Walbro WT
1,06/0,5
12,4/5,6
95/99
104/109
6,1/3,8
6,1/3,8
3,0/8,0
4,0/10,0
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.
The table indicates the highest and lowest values.
Approved accessories
Plastic knifes
Trimmer head
Trimmer head
Trimmer head
Trimmer head
Edger attachment (LD)
Hedge trimmer attachment (LD)
Type
Tricut
∅
300 mm.
Trimmy H II, M10
Trimmy Fix , M10
Trimmy Hit Pro (USA)
Superauto II
∅
200 mm.
Length 580 mm
Cutting attachment guard Art No.
503 74 50-01
503 74 50-01
503 74 50-01
503 74 50-01
503 74 50-01
-
-