HTC Dash 3G TM1634 - Manual (Page 7)

10 11
sIm CaRd and baTTERy
Your Subscriber Identity Module (SIM) card identifies you to
the wireless network. Your phone will not work without the SIM
card. To insert the SIM and battery:
1. Detach your SIM card.
2. Remove the battery cover
by putting your fingernail
in the notched cover release
on the bottom of your phone.
Lift the battery cover up and
away.
3. Remove the battery and
unlock the SIM card lock
by pressing the release in
toward the battery compartment.
Slide the SIM card into the slot
with the golden contacts
facing down and the notched
corner facing out and then
close the SIM card lock.
4. Align the golden contacts
on the battery with the
contacts in the battery
compartment. Snap the
battery into place and
replace the battery cover.
5. Plug the charger into the
phone and into an electrical
outlet to charge. When charging
is complete, disconnect the
charger from the phone.