HP 2200 - Manual (Page 51)

set the fax header 45
hp psc 2200 series
1 Press Setup.
2 Press 3, then press 1.
This selects Basic Fax Setup, then selects Date and Time.
3 Enter the month, day, and year (last two digits only) by pressing the
appropriate number on the keypad.
The underline cursor presented initially beneath the first digit advances
automatically to each digit after, each time you press a button. The
time prompt automatically appears after you enter the last digit of the
date.
4 Enter the hours and minutes.
The AM/PM prompt automatically appears after the last digit of the
time is entered.
5 Press 1 for AM or 2 for PM.
The new time and date settings appear on the front panel.
set the fax header
We recommend that you use the Fax Setup Wizard during installation to set
up the Fax Header. Follow these steps to enter your name and fax number.
1 Press Setup.
2 Press 3, then press 2.
This selects Basic Fax Setup, then selects Fax Header.
3 After Your Name appears, enter your name using the numeric keypad,
as described in the next section, enter text, then press Enter.
4 Using the keypad, enter your fax number.
5 After you finish entering your fax number, press Enter.
enter text
The following list provides tips for entering text using the front-panel keypad.
• Press the keypad numbers that correspond to the letters of a name.
In Hungary, the subscriber identification code (fax
header) can be set or changed only by authorized
personnel. For more information, contact your
authorized HP dealer.
6JGUG NGVVGTU EQTTGURQPF
VQ VJKU PWODGT CPF UQ QP #$%