Harman FL 8380 - Manual (Page 6)

6 REAR PANEL CONNECTIONS
DIGITAL
OUTPUT
AUDIO
OUTPUT
LEFT
RIGHT
REMOTE
IN OUT
SERIAL NO.
AC INPUT
AC 230V ~ 50Hz
20W
MODEL NO.: FL 8380
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, U.S.A.
MADE IN CHINA
SHOCK HAZARD: DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
HDCD ® and High Definition Compatible Digital ®
are registered trademarks of Pacific Microsonics, Inc.
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN CLASS 1 LASER PRODUCT
®
™ ¢ ∞ £ ¡
0 AC Power Cord: Connect this plug to an AC
outlet. If the outlet is switch controlled, make cer-
tain that the switch is in the ON position.
1 Coaxial-Digital Output: Connect this
jack to the coaxial-digital input of a digital
audio/video receiver or an external digital-to-
analog converter for direct access to the digital
signals of the FL 8380. DO NOT connect this jack
to the standard audio inputs of any device.
2 Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the FL 8380 provide signals to
other products.
3 Remote Control Input: Connect the out-
put of a remote infrared sensor or the remote
control output of another compatible Harman
Kardon product. This will enable the remote con-
trol system to operate even when the front panel
Remote Sensor
D is blocked. It will also allow
use of the FL 8380 with optional, external control
systems.
4 Analog Audio Outputs: Connect these
jacks to the analog CD audio inputs of your
receiver, surround processor or preamplifier.
Rear Panel Connections
0
1
2
3
4
AC Power Cord
Coaxial Digital Output
Remote Control Output Remote Control Input
Analog Audio Outputs