Starting a programme, Starting a typical wash programme – Hotpoint WT761 User Manual

Page 9

Advertising
background image

9

Starting a Programme

Description

C

ont

ents

Programmes

and

Option

Modif

iers

C

ontrol

Panel

F

eatures

Installation

Det

ergents

and

L

aundry

C

are

and

Maint

enanc

e

Prec

autions

and

A

dvic

e

Something

Wrong?

-

Troubleshooting

Servic

e

GB

1. Switch the machine on by
pressing the On/Off button.

2. Sort your laundry into groups
by washcare labels. Load the
machine.
Close the machine door by
pushing it until it clicks.

3. Add detergent and fabric
conditioner

to the dispenser

drawer.

! Refer to detergent
manufacturer’s dosage
instructions.

4. Turn the programme
selector

dial to the required

programme.

5. Select any optional wash
feature(s)

(

see Option Modifiers)

you require by pressing the
appropriate button(s).
- Indicator lights will show what

you have chosen.

6. Reduce the programmes wash temperature:
- Press the Variable Temperature button, each press

will reduce the wash temperature by 5˚C.
The new temperature will be shown in the display.

7. Reduce the programmes spin speed:
- Press the Variable Spin Speed button, each press

will reduce the spin speed.
The new spin speed will be shown in the display.

8. In addition to showing you the
wash temperature and spin
speed for your selected
programme, the digital display
will show you the time remaining
until the end of the programme.
- If ‘Time Delay’ option was selected the display will
show the time remaining until the start of the wash
programme.

9. Start the programme by pressing the
Start/Cancel button for at least 3 seconds.
The ‘Door Locked’ indicator will light up.

To stop/change a programme once the machine
has started:
- Press the Start/Cancel button for 3 seconds.
- Select ‘Pump Out’

on the Programme selector

dial.

When the machine has finished emptying:
- Turn the Programme selector dial to the new

programme required (you may need to add detergent).

- Press the Start/Cancel button to start the new

programme.

10. During the programme,
the status indicator lights will
show you what stage in the
programme

the machine has

reached (wash, rinse, spin).

11. A short time after the
programme has finished the

Door Locked

’ indicator will go

out and you can open the
machine door.

12. Switch the machine off by pressing the On/Off
button.

! Do not allow children to play with the machine or
tamper with the controls.
! Do not overload the machine. This may damage the
laundry and reduce the quality of the wash.
The maximum load is 7kg (Cotton).
! Do not try to open the dispenser drawer during any
programme.
! Do not try to open the machine door when the
‘Door Locked’ indicator is lit.

Starting a typical wash programme

Advertising