HP GS80 - Manual (Page 9)

Step 6 - Configure Packaging Options Step 6 - Configure Packaging Options Step 6 - Configure Packaging Options Step 6 - Configure Packaging Options
Step 6a - Redundant (N+1) Power Supplies Step 6a - Redundant (N+1) Power Supplies Step 6a - Redundant (N+1) Power Supplies Step 6a - Redundant (N+1) Power Supplies
Power supplies included with Model 4 and Model 8 systems can support all combinations of CPUs, memory, and I/O that can be configured within
the system boxes.
Additional 48V power regulators can be ordered to provide N+1 power redundancy.
For Model 4 systems, order one power supply to achieve N+1 capability; for Model 8 systems, order two power supplies to achieve N+1
capability.
1000W 48V power supply H7510-BA
Step 6b - Internal System Expansion Step 6b - Internal System Expansion Step 6b - Internal System Expansion Step 6b - Internal System Expansion
AlphaServer GS80 Model 4 and Model 8 systems can support one additional PCI drawer (master or expansion) or
DS-SL13R-xx StorageWorks shelf in the system cabinet.
Internal StorageWorks Internal StorageWorks Internal StorageWorks Internal StorageWorks
Expansion
Expansion Expansion Expansion
System cabinet provides space for one forward facing StorageWorks shelf
One DS-SL13x-xx Ultra3 SCSI (LVD) shelf; shelf supports a maximum of 14 Ultra3 disk drives
Each UltraSCSI StorageWorks shelf requires a SCSI controller and a SCSI cable to connect
controller to shelf
StorageWorks drives are listed in a subsequent section
Configuring Configuring Configuring Configuring
DS-SL13R-xx Ultra3 (LVD)
DS-SL13R-xx Ultra3 (LVD) DS-SL13R-xx Ultra3 (LVD) DS-SL13R-xx Ultra3 (LVD)
Shelves
Shelves Shelves Shelves
Single-bus Ultra3 shelf requires a 3X-KZPCA-AA Ultra2 (LVD) SCSI adapter or DS-KZPCC-xx
RAID controller and a SCSI cable to connect controller to shelf
Split-bus Ultra3 shelf requires two 3X-KZPCA-AA Ultra2 (LVD) SCSI adapters, at least one dual-
channel 3X-KZPEA-DB Ultra3 (LVD) SCSI adapter, or DS-KZPCC-xx RAID controllers and SCSI
cables to connect controller to shelf
Ultra3 shelves connected to 3X-KZPCA-AA adapters in the power cabinet require BN38C-02
2-meter cables; DS-KZPCC-xx RAID controllers require BN37A-02 2-meter cables
Ultra3 shelves connected to 3X-KZPCA-AA adapters in an attached expander cabinet require
BN38C-10 10-meter cables; DS-KZPCC-xx RAID controllers require BN37A-10 10-meter
cables
Ultra3 shelves connected to 3X-KZPCA-AA adapters in a remote expander cabinet require 10
20-meter BN38C-xx cables, depending upon physical cabinet location; DS-KZPCC-xx RAID
controllers require BN37A-xx cables
Ultra3 Universal drives are listed in a subsequent section
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf,
International except Japan DS-SL13R-AA
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, Japan DS-SL13R-AJ
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, International
except Japan DS-SL13R-BA
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, Japan DS-SL13R-BJ
NOTE: NOTE: NOTE: NOTE: Model 4314 shelf with DS-KZPCC-CE RAID controller does not support a disk drive in the
last slot.
QuickSpecs
HP AlphaServer GS80 (1224 MHz)
Options
DA - 11422 North America — Version 7 — August 19, 2003 Page 9