Philips HP 4940 - Manual (Page 10)

Problem Cause Solution
The
appliance
does not
work at all.
Perhaps the socket
to which the
appliance has been
connected is not
live.
Make sure the socket is live.
The appliance may
have overheated
and switched itself
off.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the grilles
to make sure they are not
blocked by fluff, hair, etc.
The appliance may
not be suitable for
the voltage to
which it has been
connected.
Make sure that the voltage
indicated on the type plate of the
appliance corresponds to the
local mains voltage.
The mains cord of
the appliance may
be damaged.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by
Philips or similarly qualified
persons in order to avoid a
hazard.
The appliance may
not be suitable for
the voltage to
which it has been
connected
Make sure that the voltage
indicated on the appliance
corresponds to the local mains
voltage.If necessary adjust the
position of the dual voltage switch
with a screwdriver or coin.
EnglisH 10