I.C.T.C. Holdings Corporation 10-55-013-2 300 series - Manual (Page 5)

Hydrapulse TM - Gravity Feed Models
Models 1140GD, 1000MD & 1100MD
When reliability, durability and cost are important
choose "HYDRAPULSE TM " No other airless unit on the market compares
Model Maximum Output Maximum Tip Size Maximum Pressure Motor/ Engine Size
1000MD .70 GPM .026 3000 PSI 1.0 HP Electric
1100MD 1.0 GPM .031 (2 Guns .019) 3000 PSI 1.5 HP Electric
1140GD 1.0 GPM .031 (2 Guns .021) 3000 PSI 4 hp Honda TM Gas GX
Flow rate established with water at 2,000 PSI (138 bar) at the tip.
Models and specifications subject to change without notice
1100MD
1100MD
1000MD 1140GD
"Rental proven, rental
tough" - Many
Hydrapulse TM units 15,
20, 25 years old and
still in service
Hydrapulse TM airless
means less costly
repairs since the piston
works in hydraulic oil
and not in the paint.
Repairs are easier and
less costly since two
inexpensive check balls
take most of the wear.
Gravity feed provides
for easy paint straining,
eliminates priming
problems and allows for
spraying of heavier
bodied paints
Aluminum 3 gallon or 5
gallon gravity feed tank
system increases
portability and
eliminates the need to
move a bucket
Pneumatic tires on
steel rims
Industrial duty, fan
cooled, fully enclosed AC
electric motor - "In this
case bigger is better"
Belt drive pump
system reduces pump
speed resulting in less
wear, longer pump life,
and lower amp draw
No electronics to fail,
hydraulic pressure
control provides even
spray pattern
Extremely easy to
maintain
.7 to 1.0 GPM allows
for spraying of
heavier materials
Lifetime warranty on
hydrapulse membrane
Lifetime warranty on
powder coated steel
and chrome frame
Hydrapulse TM
Membrane
•
•
•
•
•
•
•
•
•
•
•
•