HP P2360AA #ABA - Manual (Page 5)

Installation
Software Installation
Insert the CD into your CD-ROM drive. If the setup program
does not appear, click Start, then click Run. Type <drive
letter>:\setup. Click Ok. (For example, if the disk is in drive
D, enter D:\Setup.) Follow the onscreen instructions. You will
be asked to reboot your PC.
Hardware Installation
STEP 1 - Power on your system.
STEP 2 - Connect the USB receiver to any available USB port
or hub connected to your computer.
STEP 3 - Continue on to the User Setup on Page 7.
- 5 -