Harbor Freight Tools 45689 User Manual
Page 2
Page 2
For technical questions, please call 1-800-444-3353.
SKU 45689
SaVe thiS Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance, and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
general SaFetY WarningS and precautionS
1.
Keep WorK area clean and drY. Cluttered, damp or wet work areas invite
injuries.
2.
Keep children aWaY FroM WorK area. Do not allow children to handle this
product.
3.
Store idle eQuipMent. When not in use, tools and equipment should be stored in a
dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of
children.
4.
do not uSe thiS product iF under the inFluence oF alcohol or drugS.
Read warning labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not attempt to use this product.
5.
uSe eYe, hearing, Breathing, and hand protection. Wear an ANSI approved
welding helmet/goggles with shaded lens, hearing protectors, breathing respirator, and
welding gloves when using this product. ANSI approved welding helmet/goggles with
shaded lens, hearing protectors, breathing respirators, and welding gloves are available
from Harbor Freight Tools.
6.
dreSS SaFelY. Sparks and hot metal can injure. Always wear body protection. Non-
skid footwear or safety shoes should be used when working with this product. Do not wear
loose clothing or jewelry as they can become caught in moving parts. Wear a protective
hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-
sleeve shirt, roll sleeves up above elbows.
7.
induStrial applicationS MuSt FolloW oSha reQuireMentS.
Rev 02/02
SpeciFicationS taBle
n
o
it
p
ir
c
s
e
d
m
e
ti
Electrical Input Requirements
115 Volt
Rated Output
1.5KVA @ 50% Duty Cycle
Output Amps
+ / - 10 % 5,500
Material Capacity
1/8” Thick, Mild Steel
Tong Length
6”
Overall Dimensions
13” x 6” x 4.5”
.
s
b
L
4
.
5
2
t
h
g
i
e
W