HP 463777-001 User Manual
Page 31
Removal and replacement procedures
Maintenance and Service Guide
4–5
Installing an HP Pocket Media Drive and HP Pocket Media Drive Adapter
Å
WARNING: To reduce the risk of electric shock or damage to your equipment:
■
Plug the power cord into an AC outlet that is easily accessible at all times.
■
Disconnect power from the product by unplugging the power cord from the AC outlet.
■
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not
disable the power grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety
feature. It is possible to receive an electric shock from a system that is not properly grounded.
1. Disconnect the docking station from AC power.
2. Remove the hard drive security screw 1 on the rear panel of the docking station and remove the hard drive
cover 2 from the hard drive bay.
Ä
CAUTION: To reduce the possibility of damaging the hard drive, grasp the hard drive cover from the bottom to remove it.