Hunter Fan 82020 - Manual (Page 7)

A9
I
Secure the motor by tightening the 2 screws.
A10
Turn on the power source.
7
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG fROM THE WIRING HARNESS.
00000000
A7
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
00000000
H
A8
ON
OFF
A11
Test the motor. If the motor does not run, check the plug
connection.
A12
C1
Go to step
on page 10
to attach grille.
42947-01 01/12/2007