Harbor Freight Tools Drillmaster 2 HP Fixed Base Router 68341 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. SKU 68341
Read the entiRe imPORtant
SaFety inFORmatiOn section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
tO PRevent SeRiOuS
injuRy FROm
aCCiDental OPeRatiOn:
turn the Power Switch off and unplug the Router
before adjusting or installing accessories.
Operating instructions
Spindle
Main
Housing
(5)
Collet Nut
Wrench (51)
Spindle
Wrench (50) Spindle
Collet
Nut (1)
Bit
(sold separately)
Collet Nut
Wrench (51)
Spindle
Wrench (50) Spindle
Collet
Nut (1)
Unlock the Lock Lever (30). Rotate the Main Housing to raise or
lower the Spindle so you can access the
Spindle and Collet Nut with the Wrenches.
Remove or insert a Collet Chuck as needed
to fit the bit size, then insert the bit (sold
separately)
and tighten the
Collet Nut with
the Wrenches.
1 2
Turn the Router upside down and hold the
Spindle in place with the Spindle Wrench
while turning the Collet Nut counterclockwise with
the Collet Nut Wrench to loosen the Collet Nut.
3 4
tool Set up
installing Bits
Lock Lever
(30)