HONDA HS928 - Manual (Page 60)

58
TRANSPORTING
BEFORE LOADING
H
L
Weight of snowblower: (Operating weight)
Loading the snowblower on a trailer should be performed on a firm,
level surface.
Use a loading ramp that is strong enough to support the combined
weight of the snowblower and the operator:
267 lbs (121 kg) 245 lbs (111 kg)
256 lbs (116 kg)
225 lbs (102 kg)
231 lbs (105 kg) 203 lbs (92 kg)
212 lbs (96 kg)
273 lbs (124 kg)
The loading ramp must be long enough so
that its slope is 15° (26%) or less:
8.2 ft
(2.5 m)
1.6 ft
(50 cm)
Length of
Ramp (L)
Height (H) 9.8 ft
(3.0 m)
2.0 ft
(60 cm)
11.5 ft
(3.5 m)
2.3 ft
(70 cm)
If the truck bed has a low roof or cover, with less than 4.9 ft (1.5 m)
of headroom, lower the discharge deflector for better clearance, or
remove the chute assembly.
Check that there is sufficient fuel in the tank. The engine may stall on
the ramp if there is not enough fuel in the tank.
3.
4.
5.
1.
2.
TA
TAS
WA
WAS
HS724 HS928 HS1132
Types
Models
10/05/10 11:00:14 31767721_059