Shear bolt replacement procedure, 49 servicing your snowblower – HONDA HS928 User Manual

Page 51

Advertising
background image

49

SERVICING YOUR SNOWBLOWER

SHEAR BOLT REPLACEMENT PROCEDURE

AUGER SHEAR BOLT (2)

6 mm SELF-LOCKING NUT (2)

BLOWER SHEAR BOLT

6 mm SELF-LOCKING NUT

Place the snowblower on a firm, level surface.

Turn the engine switch OFF, and remove the cap from the spark plug.

Clean the auger and blower of snow, ice or any other foreign
particles.

Check the entire snow clearing mechanism.

Replace any broken shear bolts. Tighten securely.

1.

2.

3.

4.

5.

10/05/10 10:58:53 31767721_050

Advertising
This manual is related to the following products: