Advanced playback – haier L19T12W-C User Manual

Page 33

Advertising
background image

Advanced Playback

PROGRAM

When playing discs, press " PROGRAM " to
enter program mode. Press the digit buttons to select
the program number that you want. When finished,
move the cursor to select "START" . This will start the
program playback. If you want to cancel this function,
press " STOP " , then press "PLAY/ENTER" .

REPEAT

IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE
OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.

SUBTITLE

Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.

REPEAT A-B

Press A-B to mark the start-point, press again to
set an end point to complete setting. The
selected section A-B will be repeated immediately.
Press the Repeat A-B again to cancel this function.

SEARCH

Advanced Playback

SLOW PLAY

Press SLOW to play a disc in slow forward. Each time
the SLOW button is pressed, the slow motion
speed changes.
Press PLAY /ENTER to resume normal playback.

This function is invalid for CD .

Note:

D.MENU

Press this key to display root menu, select item
according to your preference. (This function will
work with a DVD having a multi-layer menu.).

ANGLE

When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole
view and exterior scene.)

Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English

Audio 2/2: AC 3 5.1 CH English

If you play CD disc, press this button can cycle among
Mono Left, Mono Right, Mix-Mono and Stereo.

AUDIO

TITLE/PBC

With some DVD discs pressing this key will display the
title menu. You can then use the digit buttons to select
the item you prefer.

Note: When press this button continuously, you must
above 3 seconds interval.

Press "SEARCH" once to display the search menu.
Use the up/down navigation buttons to select the
item you require. Press PLAY/ENTER to confirm
(CD press the search button
several times to select the item). And then press
the

to input

the item you require. Press PLAY/ENTER to confirm.

numeric buttons or navigation buttons

Press REPEAT button multiple times to reach
desired play mode:
DVD
Chapter repeat, Title repeat, All repeat
CD
Single-play current track, Repeat One-repeat
current track, Repeat Folder-repeat current
folder, Folder-play current folder.

Advertising
This manual is related to the following products: