HP 2700 - Manual (Page 171)

5. Click OK.
6. Go to Checking DIMM installation .
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1. Turn the printer on. Check that the printer is in the Ready state after it has gone through the startup
sequence. If an error message appears, a DIMM might have been incorrectly installed.
2. Print a configuration page. See Using printer information pages .
3. Check the Installed Personalities and Options section on the configuration page and compare it
with the configuration page that you printed before the DIMM installation.
4. The DIMM might not be installed correctly. Repeat the installation procedure.
-or-
The DIMM may be defective. Try a new DIMM.
ENWW Installing memory DIMMs 161