HONDA BF5A - Manual (Page 47)

AMBIENT TEMPERATURE
4.8 lbf·ft (6.5 N·m , 0.66 kgf·m)
45
Engine Oil Recommendations Gear Case Oil Level Check
SERVICING YOUR OUTBOARD MOTOR
GEAR OIL
LEVEL SCREW
GEAR OIL
DRAIN/FILL
SCREW
Oil is a major factor affecting
performance and service life. Use
4-stroke detergent oil. Check the gear case oil level with the
engine stopped and the outboard
motor in the vertical position.
Remove the oil level screw and see
whether oil flows from the oil level
hole.
If oil flows from the oil level hole,
the oil level is OK. Reinstall the
screw and tighten it securely.
OIL LEVEL SCREW TORQUE:
Honda 10W-30 FC-W outboard
motor oil is recommended for
general use.
If Honda 10W-30 FC-W oil is not
available, Honda recommends that
you use API service category SG, SH
or SJ oil. The SAE oil viscosity and
service category are in the API label
on the oil container.
TM
09/06/15 14:51:11 31ZV1650_046